筆記本在Ubuntu調節屏幕亮度的技巧

來源：懂視網 責編：小采時間：2020-11-09 15:59:22

筆記本在Ubuntu調節屏幕亮度的技巧

筆記本在Ubuntu調節屏幕亮度的技巧:CONTROL_BRIGHTNESS=1 # * If your system has the file /proc/acpi/video/VID/LCD/brightness (VID may # be VID1 or similar), use this file as BRIGHTNESS_OUTPUT, and use # the command echo value. The possible values can be listed using the

推薦度：

點擊下載本文 文檔為doc格式

導讀筆記本在Ubuntu調節屏幕亮度的技巧:CONTROL_BRIGHTNESS=1 # * If your system has the file /proc/acpi/video/VID/LCD/brightness (VID may # be VID1 or similar), use this file as BRIGHTNESS_OUTPUT, and use # the command echo value. The possible values can be listed using the

CONTROL_BRIGHTNESS=1 # * If your system has the file "/proc/acpi/video/VID/LCD/brightness" (VID may # be VID1 or similar), use this file as BRIGHTNESS_OUTPUT, and use # the command "echo value". The possible values can be listed using the

CONTROL_BRIGHTNESS=1

# * If your system has the file "/proc/acpi/video/VID/LCD/brightness" (VID may

# be VID1 or similar), use this file as BRIGHTNESS_OUTPUT, and use

# the command "echo ". The possible values can be listed using the

# command:

# cat /proc/acpi/video/VID/LCD/brightness

# * If you have a file /sys/class/backlight/.../brightness, then you can use

# that file as BRIGHTNESS_OUTPUT, and the command "echo ".

# As far as I understand it the values are between 0 and

# the value contained in the file /sys/class/backlight/.../max_brightness.

聲明：本網頁內容旨在傳播知識，若有侵權等問題請及時與本網聯系，我們將在第一時間刪除處理。TEL:177 7030 7066 E-MAIL:11247931@qq.com